Quick summary: Battery Passport Identification & QR Codes explained: ISO/IEC 15459 IDs, Article 13 QR marking and DPP registry upload, all due 18 February 2027.
Battery passport identification & QR codes are the two linked elements that give each in-scope battery a digital identity under EU Regulation 2023/1542. From 18 February 2027, every battery placed on the EU market needs a QR code, and LMT batteries, EV batteries and industrial batteries above 2 kWh need a battery passport reached through that code and tied to an ISO/IEC 15459 unique identifier.
In plain terms, the unique identifier answers “which battery is this?”, and the QR code is how a person or a machine reaches that battery’s record. Get battery passport identification & QR codes right and every later obligation, from due diligence to recycled-content reporting, has a stable place to live. Get them wrong and you are reprinting housings, re-keying databases and explaining gaps to market surveillance authorities.
Two articles carry most of the load: Article 13 for the QR code and Article 77 for the passport and its identifier.
Many teams treat battery passport identification & QR codes as a labelling job for the packaging line. That framing misses the point. The QR code is only a data carrier. The identifier is a key into a live record that has to stay accurate, complete and up to date through service, repair, repurposing and recycling.
A QR code without a governed identifier behind it is a sticker, not a passport.
Every battery gets a QR code, including portable and SLI batteries. For LMT batteries, EV batteries and industrial batteries above 2 kWh, that code must open the battery passport. For all other batteries, it opens the label information and related documents required by Article 13, such as the EU declaration of conformity.
Regulation (EU) 2025/1561 pushed due diligence obligations to 18 August 2027. It did not move the passport or QR code date. Plan for a six-month gap in which your identifiers and data carriers must already work while your due diligence records are still maturing.
The unique identifier is the anchor for every data point in the passport, so its design decisions are hard to reverse.
ISO/IEC 15459 defines how globally unique identifiers are issued through registered issuing agencies. In practice, many manufacturers build on an existing issuing agency scheme they already use for parts and logistics. The regulation does not mandate a single vendor or a single scheme, but it does require interoperability with other European digital product passports. Harmonised DPP standards covering identifiers and data carriers were published in 2026, so align your scheme with those before you print a single code.
The operator placing the battery on the market assigns the identifier and is responsible for keeping passport data current. It may authorise another operator in writing to act on its behalf. When a battery is repaired, repurposed or remanufactured and its status changes, responsibility shifts to the operator who changed it, and a new passport is linked to the original. Your identifier scheme must handle that parent and child relationship from day one.
The EU DPP registry under ESPR went live on 20 July 2026. Article 77(10) requires the identifier for each battery passport to be uploaded to it. Registration runs through an API, not a web form, so treat battery passport identification & QR codes as an integration project for IT and compliance together.
The QR code is the physical link between the battery and its data, so it must survive the battery’s full working life.

An EV or industrial battery may spend ten to fifteen years exposed to heat, vibration and cleaning agents before it reaches a recycler. The recycler still needs to scan it, and if the code fails, battery passport identification & QR codes fail together because the record becomes unreachable. That is why many manufacturers are testing direct part marking such as laser engraving on housings. Validate your chosen method against Article 13(7) with your legal team rather than relying on a marking supplier’s reading of “indelible”.
One scan does not show everyone the same data. Article 77(2) and Annex XIII split passport content into three levels: information open to the public, information for persons with a legitimate interest such as repairers and recyclers, and information reserved for notified bodies, market surveillance authorities and the Commission. Battery passport identification & QR codes therefore need role-based access behind the link, not a static web page.
Most compliance gaps appear where identifiers, codes and data are managed in separate tools.
| Requirement | Manual / spreadsheet approach | Platform approach |
|---|---|---|
| ISO/IEC 15459 identifier per battery | Ranges tracked by hand; duplicates likely | Issued automatically per unit and checked for uniqueness |
| QR code generation | Static codes from free generators | Codes generated from the identifier and linked to a live record |
| Access tiers (Article 77(2)) | One public page for everyone | Role-based views for public, legitimate interest and authorities |
| DPP registry upload (Article 77(10)) | Manual exports, no audit trail | API submission with logs |
| Repurposing and repair | New records with no link to the original | Parent and child passports linked |
For low volumes a manual set-up can work for a pilot. Once you are passporting thousands of EV or industrial batteries a year, battery passport identification & QR codes become a data-governance system, and spreadsheets cannot provide the audit trail an inspector will ask for.
The TraceX DPP platform treats battery passport identification & QR codes as one system, with the identifier as the source of truth. It assigns ISO/IEC 15459-aligned identifiers at serial level, generates the linked QR code, manages Annex XIII data with tiered access and prepares registry submissions. TraceX is GDPR, ISO 27001 and SOC 1 & 2 compliant, so sensitive supplier and performance data stays protected behind the scan.
Use these questions to judge whether your current set-up, or any vendor you are evaluating, is ready for 2027.
No. Only LMT batteries, EV batteries and industrial batteries above 2 kWh need a passport. All batteries need a QR code from 18 February 2027.
Battery passport identifier follows the ISO/IEC 15459 series or an equivalent standard, as required by Article 77(3) of Regulation 2023/1542.
Only where the nature or size of the battery makes marking it impossible or unwarranted. In that case, the code goes on the packaging and the accompanying documents.
Yes. Article 77(10) requires the identifier to be uploaded to the EU DPP registry created under the ESPR, which went live in July 2026.
No. Regulation (EU) 2025/1561 moved due diligence to 18 August 2027. Battery passport identification & QR codes remain due on 18 February 2027.