Quick summary: PPWR Fines and Penalties vary across 27 EU states. Learn what Article 68 requires, who faces enforcement and how to prepare before the Feb 2027 deadline.
We need to understand how the EU Packaging and Packaging Waste Regulation (PPWR) Fines and Penalties will be enforced across the 27 EU Member States, and what businesses need to do to prepare. The Packaging and Packaging Waste Regulation (PPWR), Regulation (EU) 2025/40, creates a common EU framework for packaging requirements. However, the amount and mechanics of penalties are not set out as one harmonised EU tariff. Under Article 68, each Member State must establish national penalty rules by 12 February 2027. Those penalties must be effective, proportionate and dissuasive. Administrative fines are expressly required for failures to comply with Articles 24 to 29.
This means businesses selling packaging or packaged products in multiple EU countries should not assume that one national enforcement approach or penalty amount applies everywhere. They should identify the relevant national rules, competent authorities and obligations applicable to each market.
PPWR affects a broad packaging ecosystem: packaging manufacturers, suppliers, brand owners, importers, distributors, fulfilment providers and producers with extended producer responsibility (EPR) obligations. A business may need to manage packaging design and composition requirements, conformity assessment, technical documentation, labelling, producer registration, reporting and waste-management responsibilities.
The commercial exposure is not limited to a fine. Non-compliance can lead to corrective action, market disruption, delayed launches, product or packaging withdrawal where provided for under applicable law, reputational damage and additional costs to reconstruct supplier and technical evidence. The precise legal consequences depend on the breached requirement and the applicable national rules.
Article 68 is the PPWR provision dealing with penalties. It requires Member States to lay down rules on penalties for infringements of the Regulation and take the measures needed to implement them. The national rules must be in place by 12 February 2027.
Article 68 also specifies that penalties for failure to comply with Articles 24 to 29 must include administrative fines. If a Member State’s legal system does not provide for administrative fines, the provision allows a procedure in which the relevant authority initiates the fining process and competent national courts impose the fine, provided the legal remedies have equivalent effect.
Importantly, Article 68 does not state a single euro amount, a common percentage of turnover, or an EU-wide maximum fine. The detailed penalty framework is to be established at national level.

Article 68(2) specifically requires administrative fines for failures to comply with Articles 24 to 29. These provisions address packaging reduction, restrictions on certain packaging formats, reusable packaging, re-use systems, refill and re-use targets—not the general conformity-assessment provisions.
| PPWR provision | Why it matters |
|---|---|
| Article 24 | Obligation related to excessive packaging, including empty-space limits. |
| Article 25 | Restrictions on the use of certain packaging formats listed in Annex V. |
| Article 26 | Obligations in relation to reusable packaging. |
| Article 27 | Obligation related to re-use systems. |
| Article 28 | Obligations related to refill, including information and refill-station requirements. |
| Article 29 | Re-use targets for specified packaging and economic operators. |
The requirements are phased and apply to different actors and activities. The fact that Article 68(2) requires administrative fines does not mean that every requirement in Articles 24–29 is already applicable to every business. Check the operative date, scope, exemptions and responsible economic operator for each provision.
While the PPWR establishes a common regulatory framework across the EU, the financial consequences of packaging non-compliance can vary significantly between Member States.
However, these figures should not be interpreted as a direct comparison of final PPWR penalties: Germany has adopted PPWR-specific implementing legislation, whereas the examples from France, Italy and Spain arise under existing national packaging and waste laws. Beyond financial penalties, non-compliant packaging may also face market restrictions, withdrawal or recall. Under Article 68, all Member States must establish and notify their PPWR penalty rules by 12 February 2027, making country-specific compliance monitoring essential for businesses operating across the EU.
The PPWR is a directly applicable EU regulation, but Article 68 requires national penalty rules. This creates a shared legal baseline alongside national differences in penalty amounts, procedures, competent authorities, investigation powers and enforcement practice.
A country-by-country comparison should therefore be based on enacted national measures and official authority guidance, not draft bills, press commentary or assumptions drawn from the previous Packaging and Packaging Waste Directive.
No. Article 68 does not establish a harmonised EU-wide maximum fine or a 4% turnover-based penalty formula. The PPWR requires penalties to be effective, proportionate and dissuasive, and expressly requires administrative fines for Articles 24–29. The amounts and detailed mechanisms are to be set through national penalty rules.
Businesses should avoid relying on penalty figures published for other EU regulations. For example, a turnover-based penalty model in another regulation does not automatically apply to PPWR. Always verify the legal basis and the national law relevant to the specific infringement.
Responsibility depends on the economic operator’s legal role and the obligation concerned. A business may have more than one role across different packaging flows or transactions.
Do not assume that every business in a packaging supply chain is responsible for every PPWR obligation. Role allocation should be assessed against the Regulation, Commission guidance and the actual contractual and operational arrangements.
Explore our detailed guide to understand PPWR EPR registration, producer responsibilities, authorised representatives, PRO participation and reporting requirements.
Read the guide: EPR Registration Under PPWR: What Businesses Need to Know
A practical compliance programme should make it possible to identify which packaging is placed on which market, who is responsible for each obligation, and where the supporting evidence is stored.
Explore our comprehensive guide to PPWR requirements and discover the key obligations, important deadlines and practical steps businesses should take to prepare.
Read the guide: PPWR Requirements: A Complete Guide for Businesses

A digital compliance system can help businesses centralise packaging specifications, supplier declarations, supporting documents, product and packaging relationships, approvals and audit trails. It can also support visibility into which packaging versions are associated with particular suppliers, products and destination markets.
For businesses managing many suppliers and packaging formats, structured data reduces dependence on disconnected spreadsheets and email attachments. It can make it easier to identify missing evidence, retrieve documentation and review changes across the supply chain.
TraceX PPWR Solutions supports organisations with digital supplier data, traceability, sustainability and compliance workflows. These capabilities can support PPWR readiness by helping teams organise supplier information, packaging-related evidence and traceability records. The platform does not replace legal advice, official conformity assessment or the obligations of the responsible economic operator.
PPWR creates a common packaging framework, but Article 68 leaves the detailed penalty rules to national systems. With Member States required to establish and notify their penalty measures by 12 February 2027, businesses should build a clear view of their roles, packaging data, conformity evidence and country-specific obligations now.
The most resilient approach is to make compliance evidence part of everyday packaging and supplier management not a last-minute exercise after an authority request or a market-access problem.
By 12 February 2027, under Article 68(1). They must also notify the European Commission of the rules and measures by that date.
No common fine amount is set in Article 68. Member States establish the detailed national penalty rules within the Regulation’s requirements.
Yes. Article 68(2) requires administrative fines for failures to comply with Articles 24 to 29. It also provides an alternative court-imposed process for legal systems that do not provide administrative fines.
Article 68 does not prescribe a 4% turnover-based fine. Do not transfer penalty formulas from other EU regulations to PPWR.
The Regulation generally applies from 12 August 2026, although individual provisions have specific application dates and transitional arrangements.
A business active in several markets may need to comply with applicable obligations and national enforcement arrangements in more than one Member State. The competent authority and legal basis depend on the obligation and circumstances.
No. The Regulation has phased application dates and transitional provisions. Businesses should check the date applicable to each requirement rather than treating the entire Regulation as starting on one date.